Back Forum New

Brushed stainless steel plate

Brushed stainless steel plateStainless steel refers to the resistance to air, steam, water and other weak corrosive media and acid, alkali, salt and other chemical erosion of corrosion of the medium of steel, also known as stainless steel acid. Stainless steel wire is stainless steel surface like A surface is matte, carefully look at the top of a trace of a trace of texture, but can not touch out than the general bright stainless steel wear, looks more on the grade Of some.Stainless steel strip1, size after the allowable deviation: the length and width of the weld, width, thickness, centerline offset, bending and other deviations, should strictly control the relative position of the welding parts size, qualified after the quasi-welding, Thechapas de acero inoxidable medidas2, weld cracks: In order to prevent the occurrence of cracks, should choose the the appropriate welding process parameters and welding procedures to avoid the use of high current, do not suddenly turn off the weld joints should be lap 10 ~ 15mm, Allowed to move, Weldment.ПОСТАВЩИК ЛИСТОВ ИЗ НЕРЖАВЕЮЩЕЙ СТАЛИ ИЗ КИТАЯ3, the surface holes: welding parts must be clean, welding process to select the appropriate welding current, reduce the welding speed, so that the pool of gas completely escape.ASTM A276 439 stainless steel polished sheet

Bookmark and Share


Back Forum